Zero-turn mowers are starting to take the market by storm as more and more people begin to realize the immense benefits that come from having these mowing machines. However, there is still some confusion when it comes to operating these devices and understanding how they work in general. While many people can appreciate the physical design of a zero-turn mower, they don’t understand how it differs from a traditional riding mower.
Though subtle, this is actually a very important difference. Traditional riding mowers don’t have a rear steering system. The steering wheel is connected to the front wheels of the device. Zero-turn mowers are different. They operate with a rear-wheel steering system. Instead of having a steering wheel, zero-turn mowers tend to have two different levers. These levers are each connected to a motor in the back of the device and the motors are connected to the rear wheels.
When the device is turned on, you’ll be able to use these levers to go forward, backward, and turn from side to side. As far as the rest of the process to work a zero-turn mower goes, there isn’t much difficulty. To turn the device on, all you’ll need to do is follow a few simple steps. The first thing you’ll want to do is engage the parking brake. This will allow you to make the necessary adjustments on the mower without having to worry about it pulling forward before you’re ready.
Once you’ve engaged the parking brake, you can move on to starting the device. The next thing you’ll need to look for is the clutch. Once you’ve found it, disengage it. Next, find the choke knob and pull it out. Then advance the throttle lever forward and you’ll be able to turn your key in the ignition. When you hear the engine start, push the choke knob back in and pull the throttle lever back until it reaches a fast idle. Once you’ve let the engine warm up a bit, you can disengage the parking brake and start working.
How to Set Up My Zero Turn Mower?
When ordering a zero-turn mower, you have a few options about how to go about setting up the device. Your first option is to have the product come already assembled. This will save a lot of headaches and make it easier for you to start working right away when the machine arrives. It will cost extra, but if you have a little bit of extra money to spend this will likely be the easiest option for you. Another option for setting up your zero-turn mower is to have a technician or mechanic assemble the device for you.
If you have a friend that can cut you a good deal, or you prefer to have the machine assembled by a professional you trust, this might be the best option for you. You’ll need to compare rates to see if you’ll be able to save any money by going this route, but it could be worth the savings or peace of mind. The last option you have is to simply assemble the device yourself. This may be difficult if you don’t have a background in working with machinery or tend to be impatient.
Putting a machine like this together will take a lot of time and precise work. However, if you’re on a budget, or have experience doing these types of things, you might find this to be the best option for your situation. Before you try to set up the zero-turn mower on your own, you should have an idea of what you’re getting yourself into. There are a lot of different parts and systems that you’ll have to put together in order to have a working mower.
You’ll need to be confident that you can do this on your own. After all, if you don’t get the job done right the first time, you’ll have to hire a technician or mechanic to come over and find and fix your mistake. This will mean you’ll have wasted both your time and your money. Before you try to put the device together, take a look at the following overview to see if you think you have the patience and experience to assemble the mower.
The first part of the machine you’ll need to start with when you get the parts is the steering control system. This system is the foundation of the mower, so it is important that you put it together correctly. This will require you to work with the mounting hardware, put the steering control into the upright position, and secure the levers. This will prepare you for the next step. The next thing you’ll have to do is adjust the levers into their proper alignment.
They’ll need to be centered into a neutral operating position. Once you feel that you’ve found the best positioning for the levers, you’ll be able to tighten them into position by adjusting the mounting bolts. The next step requires you to assemble the safety switch and operator’s seat. You’ll need to put the levers into a neutral position so you can mount the seat and the seat plate. Once you’ve done this you can work on connecting the seat switch harness to the seat switch.
After that system is in place, you’ll need to take time to make sure that the seat is adjusted to settings that feel comfortable to you. After you get these things finished, the rest is relatively light work. However, there is one very important part that you’ll need to take care of. This is the battery installation. To take care of this, you’ll need to make sure you’re wearing adequate safety protection gear, especially if you aren’t familiar with battery installation methods.
Once the new lawn mower battery is in place, simply prepare the engine (look for abnormalities, check the oil level, if necessary add oil), make sure the tire pressure is accurate and put fuel into the engine of the mower. After all of this has been done, you’ll be ready to take the mower for a test run and see if there are any other adjustments that need to be made before you get to work.
As you can see, assembling a zero-turn mower is not the easiest process. If you’re on a very tight budget or have experience with these types of things, you’ll likely do fine with this. However, if you aren’t experienced and can set aside a bit of extra cash, you’ll have a much better experience if you order the machine already assembled or have a mechanic put it together for you.
How to Maintain Your Zero Turn Mower?
If you’re going to invest in a zero-turn mower, you’re going to want to make sure that you’re taking the time to maintain the machine properly. You’ll want to make sure that you’re keeping the parts in top working condition so you can maximize the amount of time that you have to use the device before you need to order replacement parts or a new device entirely. You’ll be able to get the most out of your investments as long as you follow a few simple steps.
One of the most simple, but most often forgotten steps you can take to keep your mower in top working condition is to make sure that all of the fittings and moving parts are properly greased. This will help to prevent the metal parts from rubbing together and causing too much wear and tear damage. It will help to ensure that you’ll be able to use the machine for many years to come. Another thing you can do is make sure you keep the mower clean.
You don’t want to let the mower sit out overnight. This will leave it exposed to the elements. It will be vulnerable to dust build-up, moisture damage, rust, and other damage. Instead, make sure the device is in an enclosed area or at least covered. You’ll also want to make sure that you take the time to clean the build-up grass clippings on the device. This will help to ensure that you won’t develop any sticky or gunky materials in the cracks of your lawn mower that could turn into rust later on.
Keep your lawn mower clean and it will stay in peak performance working condition for years to come. Last but not least, don’t forget to take care of the engine. Engine replacements are expensive and often avoidable if you take the extra initiative to care for your machine early on. One of the best things you can do to make sure your engine remains in working condition is to make sure you’re using the right type of gasoline or oil to fuel ratio.
This will help to ensure that you won’t have to replace the engine too early. You’ll also want to keep an eye on the oil levels. Don’t let them drop too low – this will put too much pressure on your engine and leave you with poor results.
How to Sharpen Blades on a Zero Turn Mower?
If you want the best lawn care results, you’ll want to make sure that you’re keeping your blades sharp. You’ll probably have to sharpen your blades two to three times per season to make sure that they stay in top working condition. Keep an eye on your grass to determine when this needs to be done. If you start to notice tears in your grass (often in the form of white streaks) you’ll need to sharpen your mower blades.
With a zero-turn mower, the process for this can be somewhat more difficult than others. You’ll need to lift the mower up so you can get underneath the machine. Once you’ve done this, you’ll be able to remove the blades from the bottom of the mower and take them to your workbench. Before you sharpen your blades, make sure they don’t have any cracks or imperfections that would make them dangerous to continue to use. You’ll want to pay special attention to the blade edge and the lift wings.
If you don’t find any imperfections, you can move on to sharpening the blades. Now you’re ready to focus on sharpening the blades. This can be done with either a wheel grinder or a hand grinder. It will be easier and more accurate to work with a wheel grinder, but it isn’t impossible to use a hand grinder instead. To get the best results with a wheel grinder, you’ll want to make sure you have plenty of space to work with.
You’ll also want to have a bucket of soapy water to work with nearby. Startup the machine and hold the blades to the wheel grinder. You’ll want to hold them at a steady 30-degree angle for the best results. Let them grind against the wheel grinder one to two times. After two times, dunk the blades in the soapy water so they don’t overheat. Continue to do this until you’ve created a sharp edge on the blades again.
If you’re working with a hand grinder, you’ll want to secure the blade down to a vice and make sure that the edge is facing up in an area that gives you plenty of space to work with. Once you’re ready, apply the hand grinder to the blades. You’ll want to make sure that you take off as little metal as is possible for you. You’ll also want to be careful to keep a consistent 30-degree angle if you want the best results. If the blade starts to get too hot, apply soapy water to cool it down again.
Once you’ve finished, repeat this process with the other side. Regardless of which method you use, you’ll want to balance your blades before you decide that you are done with your work. This will help to ensure that you’ll get the most accurate cut while working with your blades and can get the most use out of your blades as well. You can do this with a blade balancer and magnet. After you’ve done this, you’ll be ready to put the blades back on your mower and start working again.